A journal of IEEE and CAA , publishes high-quality papers in English on original theoretical/experimental research and development in all areas of automation
Volume 6 Issue 1
Jan.  2019

IEEE/CAA Journal of Automatica Sinica

  • JCR Impact Factor: 11.8, Top 4% (SCI Q1)
    CiteScore: 17.6, Top 3% (Q1)
    Google Scholar h5-index: 77, TOP 5
Turn off MathJax
Article Contents
Guangyu Xiong, Xiuqin Shang, Gang Xiong and Timo R. Nyberg, "A Kind of Lean Approach for Removing Wastes From Non-Manufacturing Process With Various Facilities," IEEE/CAA J. Autom. Sinica, vol. 6, no. 1, pp. 307-315, Jan. 2019. doi: 10.1109/JAS.2019.1911351
Citation: Guangyu Xiong, Xiuqin Shang, Gang Xiong and Timo R. Nyberg, "A Kind of Lean Approach for Removing Wastes From Non-Manufacturing Process With Various Facilities," IEEE/CAA J. Autom. Sinica, vol. 6, no. 1, pp. 307-315, Jan. 2019. doi: 10.1109/JAS.2019.1911351

A Kind of Lean Approach for Removing Wastes From Non-Manufacturing Process With Various Facilities

doi: 10.1109/JAS.2019.1911351

the National Natural Science Foundation of China 61773381

the National Natural Science Foundation of China 61773382

the National Natural Science Foundation of China 61533019

the National Natural Science Foundation of China 91520301

Finnish TEKES's Project "SoMa2020:Social Manufacturing" 211560

Chinese Guangdong's S & T Project 2015B010103001

Chinese Guangdong's S & T Project 2016B090910001

Chinese Guangdong's S & T Project Gang Xiong 2017B090912001

More Information
  • It is important to identify and remove the wastes not only from manufacturing process, but also from nonmanufacturing process. In the last several decades, significant research achievements and practice benefits have been achieved about removing wastes from manufacturing process. Since the 1990s, some researchers and lean practitioners have paid more attention to removing waste from non-manufacturing process. Based on the authors' research work and industrial practice, the paper introduces a kind of lean approach for removing waste from non-manufacturing process. In its case study, the order handling process in a value chain is described with respect to a factory and its downstream distribution centers (DCs). The paper proposes a lean approach solution for creating the improved order handling process, and analyze how great improvements in performance can be achieved. As a result, the significant achievement has created a win-win scenario for both the nonmanufacturing process in a factory and non-manufacturing facilities (like DCs) across the value chain. It demonstrates that improvements have been made by removing waste from the non-manufacturing process that takes place within a factory as well as with external participants through the whole value chain. Likewise, the proposed lean approach has helped the case companies to achieve greater levels of efficiency and more benefits. Finally, some conclusions are drawn.


  • loading
  • [1]
    J. P. Womack and D. T. Jones, "From lean production to lean enterprise, " Harvard Business Rev., vol. 72, no. 2, pp. 93-103, 1994. doi: 10.1016-j.ccl.2008.07.004/
    J. F. Krafcik, "Triumph of the lean production system, " Sloan Manag. Rev., vol. 30, no. 6, pp. 1566-1574, Jan. 1988.
    J. Pettersen, "Defining lean production:some conceptual and practical issues, " TQM J., vol. 21, no. 2, pp. 127-142, 2009. doi: 10.1108/17542730910938137
    D. Friel, "Transferring a lean production concept from Germany to the United States: the impact of labor laws and training systems, " IEEE Eng. Manag. Rev., vol. 42, no. 4, pp. 108-118, Nov. 2014. http://www.mendeley.com/research/transferring-lean-production-concept-germany-united-states-impact-labor-laws-training-systems/
    N. Ivezic, T. E. Potok, and L. Pouchard, "Multiagent framework for lean manufacturing, " IEEE Intern. Comput., vol. 3, no. 5, pp. 58-59, Sep-Oct. 1999. http://www.mendeley.com/catalog/multiagent-framework-lean-manufacturing/
    L. Bamber and B. G. Dale, "Lean production:A study of application in a traditional manufacturing environment, " Product. Plann. Control, vol. 11, no. 3, pp. 291-298, 2000. doi: 10.1080/095372800232252
    S. Campbell, "Tracking lean (automated shop floor data-capture technologies for lean automotive manufacturing), " Manuf. Eng., vol. 83, no. 1, pp. 38-41, Feb-Mar. 2004. http://ieeexplore.ieee.org/xpls/abs_all.jsp?arnumber=1327420
    T. Ohno, Toyota Production System on Audio Tape:Beyond Large Scale Production. New York:Productivity Press, 2001.
    G. Morteza and A. Adel, "Business excellence via advanced manufacturing technology and lean-agile manufacturing, " J. Manuf. Technol. Manag., vol. 29, no. 1, pp. 2-24, 2018. doi: 10.1108/JMTM-03-2017-0049
    M. Dimitris, F. Sophia, V. Ekaterini, and A. Koutoupes, "A Lean PSS design and evaluation framework supported by KPI monitoring and context sensitivity tools, " Int. J. Adv. Manuf. Technol., vol. 94, no. 5-8, pp. 1623-1637, Feb. 2018. doi: 10.1007/s00170-017-0132-5
    C. Federica, P. Margherita, C. Maria, J. Gosling, and L. Purvis, "Integrating the environmental and social sustainability pillars into the lean and agile supply chain management paradigms: A literature review and future research directions, " J. Cleaner Product., vol. 172, pp. 2336-2350, Jan. 2018.
    J. P. E. Souza and J. M. Alves, "Lean-integrated management system: A model for sustainability improvement, " J. Cleaner Product., vol. 172, pp. 2667-2682, Jan. 2018.
    N. S. Gandhi, S. J. Thanki, and J. J. Thakkar, "Ranking of drivers for integrated lean-green manufacturing for Indian manufacturing SMEs, " J. Cleaner Product., vol. 171, pp. 675-689, Jan. 2018. http://www.sciencedirect.com/science/article/pii/S0959652617323326
    J. Rajashekharaia and H. Ramakrishna, "Six Sigma in manufacturing and non-manufacturing process, " in Proc. National Conf. Advances in Mechanical Engineering, Jamia Milia Islamia, New Delhi, 2006.
    C. N. Stoll and C. F. Zubas, "Total quality management (TQM) in a non-manufacturing environment, " in Proc. Ann. Reliability and Maintainability Symp., Anaheim, CA, USA, 2002, pp. 46-51.
    N. Mann, "A quantitative approach to prioritizing environmental impacts in a manufacturing and non-manufacturing facility, " in Proc. 1998 IEEE Int. Symp. Electronics and the Environment, Oak Brook, IL, USA, 1998, pp. 190-195. http://ieeexplore.ieee.org/xpls/abs_all.jsp?arnumber=675056
    C. E. Sorensen, My Forty Years with Ford. Detroit:Wayne State University Press, 2006.
    R. Kanigel, The One Best Way:Frederick Winslow Taylor and the Enigma of Efficiency. New York:Penguin Books, 1999.
    L. Robert, FORD:The Men and the Machine. Boston, MA:Little Brown, 1989.
    J. P. Womack, D. T. Jones, and D. Roos, The Machine That Changed the World:the Story of Lean Production. New York:Rawson Associates, 1990.
    J. P. Womack and D. T. Jones, Lean Thinking. London:Simon & U. Schuster, 2005.
    J. K. Liker and D. Meier, The Toyota Way Fieldbook:A Practical Guide for Implementing Toyota's 4Ps. New York:McGraw-Hill, 2006.
    J. K. Liker, The Toyota Way:14 Management Principles from the World's Greatest Manufacturer. New York:McGraw-Hill, 2004.
    J. K. Liker and H. Michael, Toyota Culture:The Heart and Soul of the Toyota Way. New York:McGraw-Hill, 2008.
    J. R. Jadhav, S. Mantha, and S. B. Rane, "Development of framework for sustainable Lean implementation: an ISM approach, " J. Ind. Eng., vol. 10, no. 3, pp. 72, Sep. 2014. doi: 10.1007/s40092-014-0072-8
    K. Johnson, "8 wastes intro 130611, " Retrieved from http://www.docin.com/p-656579883.html.
    E. M. Goldratt, It's Not Luck. Barrington, MA:North River Press, 1994.
    F. Y. Wang, "From social computing to social manufacturing:the coming industrial revolution and new frontier in cyber-physical-social space, " Bull. Chin. Acad. Sci., vol. 27, no. 6, pp. 658-669, 2012. http://d.old.wanfangdata.com.cn/Periodical/zgkxyyk201206002
    SoMa2020, "Social Manufacturing and Intelligent Systems, " Finnish TEKES's FiDiPro Project Report, Aalto University, 2014.
    X. Q. Shang, X. W. Liu, G. Xiong, C. J. Cheng, Y. H. Ma, and T. R. Nyberg, "Social manufacturing cloud service platform for the mass customization in apparel industry, " in Proc. IEEE Int. Conf. Service Operations and Logistics, and Informatics, Dongguan, China, 2013, pp. 220-224. https://ieeexplore.ieee.org/document/6611413
    G. Xiong, Y. R. Chen, X. Q. Shang, X. W. Liu, and T. R. Nyberg, "AHP fuzzy comprehensive method of supplier evaluation in social manufacturing mode, " in Proc. 11th World Congress on Intelligent Control and Automation, Shenyang, China, 2015, pp. 3594-3599. http://ieeexplore.ieee.org/document/7053314/
    X. Q. Shang, F. Y. Wang, G. Xiong, T. R. Nyberg, Y. Yuan, S. Liu, C. Guo, and S. Bao "Social manufacturing for high-end apparel customization, " IEEE/CAA J. Autom. Sinica, vol. 5, no. 2, pp. 489-500, Mar. 2018. http://www.cnki.com.cn/Article/CJFDTotal-ZDHB201802010.htm
    G. Xiong, F. Y. Wang, T. R. Nyberg, X. Q. Wang, M. C. Zhou, Z. Shen, S. S. Li, and C. Guo, "From mind to products: towards social manufacturing and service, " IEEE/CAA J. Autom. Sinica, vol. 5, no. 1, pp. 47-57, Jan. 2018. http://www.cnki.com.cn/Article/CJFDTotal-ZDHB201801005.htm
    B. Mohajeri, T. R. Nyberg, J. Karjalainen, T. Tukiainen, M. Nelson, X. Q. Shang, and G. Xiong, "The impact of social manufacturing on the value chain model in the apparel industry, " in Proc. 2014 IEEE Int. Conf. Service Operations and Logistics, and Informatics, Qingdao, China, 2014, pp. 8-1. http://www.mendeley.com/catalog/impact-social-manufacturing-value-chain-model-apparel-industry/
    G. D. Tian, M. C. Zhou, and P. G. Li, "Disassembly sequence planning considering fuzzy component quality and varying operational cost, " IEEE Trans. Autom. Sci. Eng., vol. 15, no. 2, pp. 748-760, Apr. 2018. http://ieeexplore.ieee.org/document/7917341/
    G. D. Tian, H. H. Zhang, Y. X. Feng, D. Q. Wang, Y. Peng, and H. F. Jia, "Green decoration materials selection under interior environment characteristics: A grey-correlation based hybrid MCDM method, " Renew. Sustain. Energy Rev., vol. 81, pp. 682-692, Jan. 2018.


    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Figures(5)  / Tables(4)

    Article Metrics

    Article views (1016) PDF downloads(35) Cited by()


    DownLoad:  Full-Size Img  PowerPoint