Low-Light Imaging: A Novel Industrial Endoscope With Adaptive Analog Gain for Blast Furnaces

Zunhui Yi; Lei He; Ming Lu; Chaoyang Chen; Zhaohui Jiang; Weihua Gui

doi:10.1109/JAS.2025.125690

Volume 13 Issue 4

Apr. 2026

IEEE/CAA Journal of Automatica Sinica

JCR Impact Factor: 19.2, Top 1 (SCI Q1)

CiteScore: 28.2, Top 1% (Q1)
Google Scholar h5-index: 95， TOP 5

Turn off MathJax

Article Contents

Article Navigation > IEEE/CAA Journal of Automatica Sinica > 2026 > 13(4): 796-809

Z. Yi, L. He, M. Lu, C. Chen, Z. Jiang, and W. Gui, “Low-light imaging: A novel industrial endoscope with adaptive analog gain for blast furnaces,” IEEE/CAA J. Autom. Sinica, vol. 13, no. 4, pp. 796–809, Apr. 2026. doi: 10.1109/JAS.2025.125690

Citation:

Z. Yi, L. He, M. Lu, C. Chen, Z. Jiang, and W. Gui, “Low-light imaging: A novel industrial endoscope with adaptive analog gain for blast furnaces,” IEEE/CAA J. Autom. Sinica, vol. 13, no. 4, pp. 796–809, Apr. 2026. doi: 10.1109/JAS.2025.125690

Citation:

PDF( 36772 KB)

Low-Light Imaging: A Novel Industrial Endoscope With Adaptive Analog Gain for Blast Furnaces

doi: 10.1109/JAS.2025.125690

Funds: This work was supported in part by the National Natural Science Foundation of China (62403191, 62403192), the Hunan Provincial Natural Science Foundation of China (2024JJ6223), and the Hainan Provincial Natural Science Foundation of China (625QN363)

More Information

Author Bio:
Zunhui Yi received the B.S. degree in measurement-control technology and instrumentation from Shandong University in 2017, and the Ph.D. degree in control science and engineering from Central South University in 2023. He is currently a Lecturer with Hunan University of Science and Technology. His research interests include optical imaging, image processing, and key parameters perception via visual intelligence

Lei He received the B.S. degree in measurement-control technology and instrumentation from Shandong University in 2017, and the Ph.D. degree in control science and engineering from Central South University in 2023. He is currently a Lecturer with Hunan University of Science and Technology. His research interests include parameter detection of industrial process, visual intelligent perception, and image processing

Ming Lu received the M.S. degree in instrument science and technology from Central South University in 2009, and the Ph.D. degree in control science and engineering from Central South University in 2015. Since then, he has been with the School of Information and Electrical Engineering, Hunan University of Science and Technology, where he is currently a Professor. His research interests include adaptive control, modeling, optimization, control of complex systems, and intelligent equipment and intelligent manufacturing

Chaoyang Chen received the Ph.D. degree in control science and engineering from Huazhong University of Science and Technology in 2014. He was a Postdoctoral Fellow with the School of Information Science and Engineering, Central South University, from 2015 to 2017. He is currently a Professor with the School of Information and Electrical Engineering, Hunan University of Science and Technology. His current research interests include networked control systems, complex networks, multi-agent systems, robust control, and their related applications

Zhaohui Jiang (Member, IEEE) received the M.E. degree in automatic control engineering and the Ph.D. degree in control science and engineering from Central South University in 2006 and 2011, respectively. He is currently a Professor with Central South University. His research interests include detection technology and automatic equipment, image processing, industrial VR, and modeling and optimal control of complex industrial processes

Weihua Gui (Member, IEEE) received the B.E. degree in electrical engineering and the M.E. degree in automatic control engineering from Central South University in 1976 and 1981, respectively. Since 1991, he has been a Full Professor with Central South University. His research interests include modeling and optimal control of complex industrial process, distributed robust control, and fault diagnoses. He is an Academician of the Chinese Academy of Engineering
Corresponding author: Lei He, e-mail: helei_xb@hnust.edu.cn
Received Date: 2025-02-13
Revised Date: 2025-05-28
Accepted Date: 2025-07-06

Abstract

Abstract

The burden surface topography of a blast furnace is the main basis for judging the furnace conditions and plays an important role in adjusting the charging system and ensuring the stable progress of the ironmaking process. Visible light imaging technology has the potential to capture real-time high-resolution images of the burden surface, providing a wealth of burden surface topography information. However, capturing high-quality burden surface videos in a sealed environment with extremely uneven light distribution remains an urgent problem to be solved. To this end, this paper develops a novel type of industrial endoscope with an adaptive analog gain to obtain information-rich burden surface images under complex lighting conditions. Firstly, a signal conversion model of the burden surface imaging process is constructed to analyze the impact of lighting on imaging. Based on the analysis, an imaging optical system with a large relative aperture and a long optical path imaging structure is developed to address the problem of weak illumination in the burden surface area. On this basis, an automatic exposure control system with an adaptive analog gain is designed to suppress the interference of dynamic strong light on imaging. Finally, experimental and application results demonstrate that the developed industrial endoscope can significantly enhance the effect of burden surface imaging and increase the amount of burden surface topography information obtained.
- Blast furnace,
- burden surface,
- exposure control,
- imaging technology,
- industrial endoscope

FullText(HTML)

References(35)

References

[1]	S. Lou, C. Yang, X. Zhang, H. Zhang, and P. Wu, “Blast furnace ironmaking process monitoring with time-constrained global and local nonlinear analytic stationary subspace analysis,” IEEE Trans. Ind. Inf., vol. 20, no. 3, pp. 3163–3176, Mar. 2024. doi: 10.1109/TII.2023.3300414
[2]	Y. Zong, S. Hu, D. Qin, Z. Wang, C. Zhang, J. Chu, and L. Zhang, “Iron-tapping state recognition of blast furnace based on Bi-GRU composite model and post-processing classifier,” IEEE Sens. J., vol. 23, no. 18, pp. 22006–22018, Sep. 2023. doi: 10.1109/JSEN.2023.3300123
[3]	J. Zhu, Z. Jiang, D. Pan, H. Yu, K. Zhou, and W. Gui, “Burden surface shape modeling and charging matrix optimization for the blast furnace charging process,” IEEE Trans. Ind. Inf., vol. 20, no. 11, pp. 12705–12716, Nov. 2024. doi: 10.1109/TII.2024.3424215
[4]	Y. Zhang, P. Zhou, and G. Cui, “Multi-model based PSO method for burden distribution matrix optimization with expected burden distribution output behaviors,” IEEE/CAA J. Autom. Sinica, vol. 6, no. 6, pp. 1506–1512, Nov. 2019. doi: 10.1109/JAS.2018.7511090
[5]	H. Wang, W. Li, T. Zhang, J. Li, and X. Chen, “Learning-based key points estimation method for burden surface profile detection in blast furnace,” IEEE Sens. J., vol. 22, no. 10, pp. 9589–9597, May 2022. doi: 10.1109/JSEN.2022.3163373
[6]	L. Deng, X. Chen, and Q. Hou, “Sub-aperture synthetic aperture radar imaging of fixed-platform beam-steering radar for blast furnace burden surface detection,” Sensors, vol. 24, no. 14, p. 4479, Jul. 2024. doi: 10.3390/s24144479
[7]	X. Fang, S. Zhang, X. Su, B. Zhao, W. Xiao, Y. Yin, and F. Wang, “Blast furnace condition data clustering based on combination of T-distributed stochastic neighbor embedding and spectral clustering,” in Proc. 15th Int. Conf. Control and Automation, Edinburgh, UK, 2019, pp. 1608−1613, DOI: 10.1109/ICCA.2019.8899670.
[8]	Z. Chen, Z. Jiang, C. Yang, and W. Gui, “Detection of blast furnace stockline based on a spatial-temporal characteristic cooperative method,” IEEE Trans. Instrum. Meas., vol. 70, Art. no. 2500213, Jul. 2021. doi: 10.1109/TIM.2020.3009337
[9]	Z. Jiang, J. Huang, W. Gui, Z. Yi, D. Pan, C. Xu, and K. Zhou, “A novel motion state recognition method for blast furnace burden surface in ironmaking process,” IEEE Trans. Instrum. Meas., vol. 72, Art. no. 5023914, Aug. 2023. doi: 10.1109/TIM.2023.3306525
[10]	J. Zhu, W. Gui, Z. Chen, and Z. Jiang, “A novel non-contact and real-time blast furnace stockline detection method based on burden surface video streams,” IEEE Trans. Instrum. Meas., vol. 72, p. 4502213, Feb. 2023. doi: 10.1109/TIM.2023.3244797
[11]	S. Xu, Z. Jiang, Z. Chen, D. Pan, H. Yu, and L. Li, “Blast furnace condition recognizing in the ironmaking process based on prior knowledge and Platt scaling probability,” in Proc. IEEE Int. Conf. Industrial Technology, Bristol, UK, 2024, pp. 1−6, DOI: 10.1109/ICIT58233.2024.10540890.
[12]	J. Huang, Z. Jiang, W. Gui, Z. Yi, D. Pan, K. Zhou, and C. Xu, “Depth estimation from a single image of blast furnace burden surface based on edge defocus tracking,” IEEE Trans. Circuits Syst. Video Technol., vol. 32, no. 9, pp. 6044–6057, Sep. 2022. doi: 10.1109/TCSVT.2022.3155626
[13]	Z. Chen, Z. Jiang, W. Gui, and C. Yang, “A novel device for optical imaging of blast furnace burden surface: Parallel low-light-loss backlight high-temperature industrial endoscope,” IEEE Sens. J., vol. 16, no. 17, pp. 6703–6717, Sep. 2016. doi: 10.1109/JSEN.2016.2587729
[14]	Z. Chen, X. Wang, W. Gui, J. Zhu, C. Yang, and Z. Jiang, “A novel sensing imaging equipment under extremely dim light for blast furnace burden surface: Starlight high-temperature industrial endoscope,” IEEE/CAA J. Autom. Sinica, vol. 11, no. 4, pp. 893–906, Apr. 2024. doi: 10.1109/JAS.2023.123954
[15]	Z. Chen, Z. Jiang, C. Yang, W. Gui, and Y. Sun, “Dust distribution study at the blast furnace top based on k-Sε-up model,” IEEE/CAA J. Autom. Sinica, vol. 8, no. 1, pp. 121–135, Jan. 2021. doi: 10.1109/JAS.2020.1003468
[16]	Z. Yi, Z. Chen, Z. Jiang, and W. Gui, “A novel 3-D high-temperature industrial endoscope with large field depth and wide field,” IEEE Trans. Instrum. Meas., vol. 69, no. 9, pp. 6530–6543, Sep. 2020. doi: 10.1109/TIM.2020.2970372
[17]	Z. Yi, Z. Jiang, J. Huang, X. Chen, and W. Gui, “Optimization method of the installation direction of industrial endoscopes for increasing the imaged burden surface area in blast furnaces,” IEEE Trans. Ind. Inf., vol. 18, no. 11, pp. 7729–7740, Nov. 2022. doi: 10.1109/TII.2022.3151747
[18]	W. Liu, K. T. Chau, C. H. T. Lee, C. Jiang, W. Han, and W. H. Lam, “A wireless dimmable lighting system using variable-power variable-frequency control,” IEEE Trans. Ind. Electron., vol. 67, no. 10, pp. 8392–8404, Oct. 2020. doi: 10.1109/TIE.2019.2947814
[19]	L. He, Z. Yi, C. Chen, M. Lu, Y. Zou, and P. Li, “Detail-preserving noise suppression post-processing for low-light image enhancement,” Displays, vol. 83, Art. no. 102738, Jul. 2024. doi: 10.1016/j.displa.2024.102738
[20]	Y. Lu and S.-W. Jung, “Progressive joint low-light enhancement and noise removal for raw images,” IEEE Trans. Image Process., vol. 31, pp. 2390–2404, Mar. 2022. doi: 10.1109/TIP.2022.3155948
[21]	X. Li, J. Li, J. Li, Y. Qian, T. Su, and Q. Wang, “Measure and comparison between the second-generation and the third-generation image intensifier within the different region of wavelength,” Acta Photonica Sinica, vol. 50, no. 2, Art. no. 225001, Feb. 2021. doi: 10.3788/gzxb20215002.0225001
[22]	W. Chang, B. Zhang, and G.-P. Cao, “Long focal length and large aperture zoom optical system,” in Proc. SPIE 12065, AOPC 2021: Optical Sensing and Imaging Technology, Beijing, China, 2021, DOI: 10.1117/12.2603790.
[23]	M.-W. Seo, M. Chu, H.-Y. Jung, S. Kim, J. Song, D. Bae, S. Lee, J. Lee, S.-Y. Kim, J. Lee, M. Kim, G.-D. Lee, H. Shim, C. Um, C. Kim, I.-G. Baek, D. Kwon, H. Kim, H. Choi, J. Go, J. Ahn, J.-K. Lee, C.-R. Moon, K. Lee, and H.-S. Kim, “2.45 e-RMS low-random-noise, 598.5 mW low-power, and 1.2 kfps high-speed 2-Mp global shutter CMOS image sensor with pixel-level ADC and memory,” IEEE J. Solid-State Circuits, vol. 57, no. 4, pp. 1125–1137, Apr. 2022. doi: 10.1109/JSSC.2022.3142436
[24]	B. Mandracchia, C. Zheng, S. Rajendran, W. Liu, P. Forghani, C. Xu, and S. Jia, “High-speed optical imaging with sCMOS pixel reassignment,” Nat. Commun., vol. 15, no. 1, Art. no. 4598, May 2024. doi: 10.1038/s41467-024-48987-7
[25]	W.-C. Kao, L.-W. Cheng, C.-Y. Chien, and W.-K. Lin, “Robust brightness measurement and exposure control in real-time video recording,” IEEE Trans. Instrum. Meas., vol. 60, no. 4, pp. 1206–1216, Apr. 2011. doi: 10.1109/TIM.2010.2087835
[26]	H. Li, Z. Yang, Y. Zhang, D. Tao, and Z. Yu, “Single-image HDR reconstruction assisted ghost suppression and detail preservation network for multi-exposure HDR imaging,” IEEE Trans. Comput. Imaging, vol. 10, pp. 429–445, Mar. 2024. doi: 10.1109/TCI.2024.3369396
[27]	X. Luo, Y. Yuan, S. Chen, N. Zeng, and Z. Wang, “Position-transitional particle swarm optimization-incorporated latent factor analysis,” IEEE Trans. Knowl. Data Eng., vol. 34, no. 8, pp. 3958–3970, Aug. 2022. doi: 10.1109/TKDE.2020.3033324
[28]	Y. Luo, S. Zhao, D. Yang, and H. Zhang, “A new robust adaptive neural network backstepping control for single machine infinite power system with TCSC,” IEEE/CAA J. Autom. Sinica, vol. 7, no. 1, pp. 48–56, Jan. 2020. doi: 10.1109/JAS.2019.1911798
[29]	H. Qassim, A. Verma, and D. Feinzimer, “Compressed residual-VGG16 CNN model for big data places image recognition,” in Proc. 8th Annu. Computing and Communi. Workshop and Conf., Las Vegas, USA, 2018, pp. 169–175, DOI: 10.1109/CCWC.2018.8301729.
[30]	N. Zeng, P. Wu, Z. Wang, H. Li, W. Liu, and X. Liu, “A small-sized object detection oriented multi-scale feature fusion approach with application to defect detection,” IEEE Trans. Instrum. Meas., vol. 71, Art. no. 3507014, Feb. 2022. doi: 10.1109/TIM.2022.3153997
[31]	H. Chen, P. Wu, W. Wen, and N. Zeng, “DLA-Net: A dynamically learnable attention network for intelligent surface visual inspection of aero-engine blades,” IEEE Trans. Instrum. Meas., vol. 74, Art. no. 3532114, Apr. 2025. doi: 10.1109/TIM.2025.3561440
[32]	L. Hu, X. Pan, Z. Tang, and X. Luo, “A fast fuzzy clustering algorithm for complex networks via a generalized momentum method,” IEEE Trans. Fuzzy Syst., vol. 30, no. 9, pp. 3473–3485, Sep. 2022. doi: 10.1109/tfuzz.2021.3117442
[33]	Y. Yang, G. Li, D. Li, J. Zhang, P. Hu, and L. Hu, “Integrating fuzzy clustering and graph convolution network to accurately identify clusters from attributed graph,” IEEE Trans. Network Sci. Eng., vol. 12, no. 2, pp. 1112–1125, Mar.–Apr. 2025. doi: 10.1109/TNSE.2024.3524077
[34]	Y. Yuan, R. Wang, G. Yuan, and L. Xin, “An adaptive divergence-based non-negative latent factor model,” IEEE Trans. Syst., Man, Cybern.: Syst., vol. 53, no. 10, pp. 6475–6487, Oct. 2023. doi: 10.1109/TSMC.2023.3282950
[35]	Y. Yuan, X. Luo, M. Shang, and Z. Wang, “A Kalman-filter-incorporated latent factor analysis model for temporally dynamic sparse data,” IEEE Trans. Cybern., vol. 53, no. 9, pp. 5788–5801, Sep. 2023. doi: 10.1109/TCYB.2022.3185117

Supplements(0)

Cited By

Proportional views

Proportional views

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

Figures(18) / Tables(7)

Get Citation

PDF

XML

Article Metrics

Article views (43) PDF downloads(5)

Low-Light Imaging: A Novel Industrial Endoscope With Adaptive Analog Gain for Blast Furnaces

doi: 10.1109/JAS.2025.125690

Abstract

References

Proportional views

Catalog

通讯作者: 陈斌, bchen63@163.com

Article Metrics

Export File

Citation

Format

Content