A journal of IEEE and CAA , publishes high-quality papers in English on original theoretical/experimental research and development in all areas of automation
Advanced Search

IEEE/CAA Journal of Automatica Sinica

  • JCR Impact Factor: 11.8, Top 4% (SCI Q1)
    CiteScore: 17.6, Top 3% (Q1)
    Google Scholar h5-index: 77， TOP 5
Turn off MathJax
Article Contents
Article Navigation >  IEEE/CAA Journal of Automatica Sinica  > 2023  > In Press, Accepted Manuscript
S. Lu, T. Wu, L. Zhang, J. Yang, and Y. Liang, “Interpolated bumpless transfer control for asynchronously switched linear systems,” IEEE/CAA J. Autom. Sinica, vol. 11, no. 0, pp. 1–12, Dec. 2023.
Citation: S. Lu, T. Wu, L. Zhang, J. Yang, and Y. Liang, “Interpolated bumpless transfer control for asynchronously switched linear systems,” IEEE/CAA J. Autom. Sinica, vol. 11, no. 0, pp. 1–12, Dec. 2023.
shu

Interpolated Bumpless Transfer Control for Asynchronously Switched Linear Systems

Funds:  This work was partially supported by the National Natural Science Foundation of China (62225305, 12072088), the Fundamental Research Funds for the Central Universities, China (HIT.BRET.2022004, HIT.OCEF.2022047, JCKY2022603C016), State Key Laboratory of Robotics and System (HIT), Heilongjiang Touyan Team, and China Scholarship Council (202306120113)
More Information
    Abstract
  • This paper revisits the problem of bumpless transfer control (BTC) for discrete-time nondeterministic switched linear systems. The general case of asynchronous switching is considered for the first time in the field of BTC for switched systems. A new approach called interpolated bumpless transfer control (IBTC) is proposed, where the bumpless transfer controllers are formulated with the combination of the two adjacent mode-dependent controller gains, and are interpolated for finite steps once the switching is detected. In contrast with the existing approaches, IBTC does not necessarily run through the full interval of subsystems, as well as possesses the time-varying controller gains (with more flexibility and less conservatism) achieved from a control synthesis allowing for the stability and other performance of the whole switched system. Sufficient conditions ensuring stability and $ H_{\infty} $ performance of the underlying system by IBTC are developed, and numerical examples verify the theoretical findings.

     

    • FullText(HTML)
  • loading
    • References(33)
  • [1]
    C. Edwards and I. Postlethwaite, “Anti-windup and bumpless-transfer schemes,” Automatica, vol. 34, no. 2, pp. 199–210, 1998. doi: 10.1016/S0005-1098(97)00165-9
    [2]
    Q.-K. Li, X. Li, J. Wang, and S. Du, “Stabilization of networked control systems using a mixed-mode based switched delay system method,” IEEE/CAA J. Autom. Sinica, vol. 5, no. 6, pp. 1089–1098, 2018. doi: 10.1109/JAS.2018.7511228
    [3]
    H. Shen, Z. Huang, J. Cao, and J. H. Park, “Exponential H∞ filtering for continuous-time switched neural networks under persistent dwell-time switching regularity,” IEEE Trans. Cyber., vol. 50, no. 6, pp. 2440–2449, 2019.
    [4]
    R. Ma and S. An, “Minimum dwell time for global exponential stability of a class of switched positive nonlinear systems,” IEEE/CAA J. Autom. Sinica, vol. 6, no. 2, pp. 471–477, 2018.
    [5]
    Y. Zhu and W. Zheng, “Multiple lyapunov functions analysis approach for discrete-time-switched piecewise-affine systems under dwell-time constraints,” IEEE Trans. Autom. Control, vol. 65, no. 5, pp. 2177–2184, 2019.
    [6]
    K. Zhu, J. Zhao, and G. M. Dimirovski, “H∞ tracking control for switched lpv systems with an application to aero-engines,” IEEE/CAA J. Autom. Sinica, vol. 5, no. 3, pp. 699–705, 2016.
    [7]
    S. Feng, J. Wang, and J. Zhao, “Stability and robust stability of switched positive linear systems with all modes unstable,” IEEE/CAA J. Autom. Sinica, vol. 6, no. 1, pp. 167–176, 2017.
    [8]
    P. He, J. Wen, V. Stojanovic, F. Liu, and X. Luan, “Finite-time control of discrete-time semi-markov jump linear systems: A self-triggered mpc approach,” J. Franklin Institute, vol. 359, no. 13, pp. 6939–6957, 2022. doi: 10.1016/j.jfranklin.2022.06.043
    [9]
    L. Zaccarian and A. R. Teel, “A common framework for anti-windup, bumpless transfer and reliable designs,” Automatica, vol. 38, no. 10, pp. 1735–1744, 2002. doi: 10.1016/S0005-1098(02)00072-9
    [10]
    Y. Zhao, J. Zhao, J. Fu, Y. Shi, and C. Chen, “Rate bumpless transfer control for switched linear systems with stability and its application to aero-engine control design,” IEEE Trans. Industrial Electronics, vol. 67, no. 6, pp. 4900–4910, 2019.
    [11]
    M. C. Turner and D. J. Walker, “Linear quadratic bumpless transfer,” Automatica, vol. 36, no. 8, pp. 1089–1101, 2000. doi: 10.1016/S0005-1098(00)00021-2
    [12]
    S. Fekri, M. Athans, and A. Pascoal, “Robust multiple model adaptive control (rmmac): A case study,” Int. J. Adaptive Control and Signal Processing, vol. 21, no. 1, pp. 1–30, 2007. doi: 10.1002/acs.944
    [13]
    V. Hassani, J. P. Hespanha, M. Athans, and A. M. Pascoal, “Stability analysis of robust multiple model adaptive control,” IFAC Proc. Volumes, vol. 44, no. 1, pp. 350–355, 2011. doi: 10.3182/20110828-6-IT-1002.01194
    [14]
    N. Sadati, M. Hosseinzadeh, and G. A. Dumont, “Multi-model robust control of depth of hypnosis,” Biomedical Signal Processing and Control, vol. 40, pp. 443–453, 2018. doi: 10.1016/j.bspc.2017.10.003
    [15]
    R. Hanus, M. Kinnaert, and J.-L. Henrotte, “Conditioning technique, a general anti-windup and bumpless transfer method,” Automatica, vol. 23, no. 6, pp. 729–739, 1987. doi: 10.1016/0005-1098(87)90029-X
    [16]
    R. Hanus, “A new technique for preventing control windup,” J. A, vol. 21, no. 1, pp. 15–20, 1980.
    [17]
    J. Daafouz, J. C. Geromel, and G. S. Deaecto, “A simple approach for switched control design with control bumps limitation,” Syst. &Control Lett., vol. 61, no. 12, pp. 1215–1220, 2012.
    [18]
    I. Malloci, L. Hetel, J. Daafouz, C. Iung, and P. Szczepanski, “Bumpless transfer for switched linear systems,” Automatica, vol. 48, no. 7, pp. 1440–1446, 2012. doi: 10.1016/j.automatica.2012.05.027
    [19]
    L. Zhang, K. Xu, J. Yang, M. Han, and S. Yuan, “Transition-dependent bumpless transfer control synthesis of switched linear systems,” IEEE Trans. Autom. Control, 2022. DOI: 10.1109/TAC.2022.3152721
    [20]
    X. Song and J. Lam, “Bumpless H∞ control for periodic piecewise linear systems,” Automatica, vol. 135, p. 109941, 2022.
    [21]
    L. Ni and D. W. Wang, “A gain-switching control scheme for position-error-based bilateral teleoperation: Contact stability analysis and controller design,” The Int. J. Robotics Research, vol. 23, no. 3, pp. 255–274, 2004. doi: 10.1177/0278364904041563
    [22]
    L. Zhang and P. Shi, “Stability, l2-gain and asynchronous H∞ control of discrete-time switched systems with average dwell time,” IEEE Trans. Autom. Control, vol. 54, no. 9, pp. 2192–2199, 2009. doi: 10.1109/TAC.2009.2026841
    [23]
    L. Zhang and H. Gao, “Asynchronously switched control of switched linear systems with average dwell time,” Automatica, vol. 46, no. 5, pp. 953–958, 2010. doi: 10.1016/j.automatica.2010.02.021
    [24]
    M. Han, R. Zhang, L. Zhang, Y. Zhao, and W. Pan, “Asynchronous observer design for switched linear systems: A tube-based approach,” IEEE/CAA J. Autom. Sinica, vol. 7, no. 1, pp. 70–81, 2019.
    [25]
    D. Ma and J. Zhao, “Stabilization of networked switched linear systems: An asynchronous switching delay system approach,” Systems &Control Letters, vol. 77, pp. 46–54, 2015.
    [26]
    Z. Wang, Q. Wang, and C. Dong, “Asynchronous H∞ control for unmanned aerial vehicles: switched polytopic system approach,” IEEE/CAA J. Autom. Sinica, vol. 2, no. 2, pp. 207–216, 2015. doi: 10.1109/JAS.2015.7081660
    [27]
    P. Cheng, H. Wang, V. Stojanovic, F. Liu, S. He, and K. Shi, “Dissipativity-based finite-time asynchronous output feedback control for wind turbine system via a hidden markov model,” Int. J. Syst. Science, vol. 53, no. 15, pp. 3177–3189, 2022. doi: 10.1080/00207721.2022.2076171
    [28]
    Y. Qi, W. Bao, and J. Chang, “Robust asynchronous bumpless transfer for switched linear systems,” Int. J. Control, vol. 88, no. 12, pp. 2433–2443, 2015. doi: 10.1080/00207179.2015.1046495
    [29]
    D. Liberzon and A. S. Morse, “Basic problems in stability and design of switched systems,” IEEE Control Systems Magazine, vol. 19, no. 5, pp. 59–70, 1999. doi: 10.1109/37.793443
    [30]
    D. Liberzon, Switching in Systems and Control. Springer Science & Business Media, 2003.
    [31]
    J. P. Hespanha, “Root-mean-square gains of switched linear systems,” IEEE Trans. Autom. Control, vol. 48, no. 11, pp. 2040–2045, 2003. doi: 10.1109/TAC.2003.819300
    [32]
    C. Zhou, H. Tao, Y. Chen, V. Stojanovic, and W. Paszke, “Robust point-to-point iterative learning control for constrained systems: A minimum energy approach,” Int. J. Robust and Nonlinear Control, vol. 32, no. 18, pp. 10 139–10 161, 2022. doi: 10.1002/rnc.6354
    [33]
    C. Lin, Q.-G. Wang, and T. H. Lee, “An improvement on multivariable PID controller design via iterative LMI approach,” Automatica, vol. 40, no. 3, pp. 519–525, 2004. doi: 10.1016/j.automatica.2003.10.008
    • Related Articles
    • Supplements(0)

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Figures(9)

    Get Citation
    PDF
    XML

    Article Metrics

    Article views (14) PDF downloads(0) Cited by()

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return