IEEE/CAA Journal of Automatica Sinica
Citation: | Z. L. Zhou, Y. C. Yang, and H. H. Liu, “A Braille reading system based on electrotactile display with flexible electrode array,” IEEE/CAA J. Autom. Sinica, vol. 9, no. 4, pp. 735–737, Apr. 2022. doi: 10.1109/JAS.2022.105476 |
[1] |
I. Poupyrev, S. Maruyama, and J. Rekimoto, “Ambient touch: designing tactile interfaces for handheld devices,” in Proc. 15th annual ACM Symposium on User Interface Software and Technology, 2002, pp. 51–60.
|
[2] |
I. Poupyrev and S. Maruyama, “Tactile interfaces for small touch screens,” in Proc. 16th Annual ACM Symposium on User Interface Software and Technology, 2003, pp. 217–220.
|
[3] |
L. Yobas, D. M. Durand, G. G. Skebe, F. J. Lisy, and M. A. Huff, “A novel integrable microvalve for refreshable braille display system,” Journal of Microelectromechanical Systems, vol. 12, no. 3, pp. 252–263, 2003. doi: 10.1109/JMEMS.2003.811754
|
[4] |
N. Asamura, N. Tomori, and H. Shinoda, “A tactile feeling display based on selective stimulation to skin receptors,” in Proc. IEEE Virtual Reality Annual Int. Symposium (Cat. No. 98CB36180), 1998, pp. 36–42.
|
[5] |
N. Asamura, N. Yokoyama, and H. Shinoda, “A method of selective stimulation to epidermal skin receptors for realistic touch feedback,” in Proc. IEEE Virtual Reality (Cat. No. 99CB36316), 1999, pp. 274–281.
|
[6] |
P. Xiong, X. Zhu, A. Song, L. Hu, X. Liu and L. Feng, “A target grabbing strategy for telerobot based on improved stiffness display device,” IEEE/CAA Journal of Automatica Sinica, vol. 4, no. 4, pp. 661–667, Oct. 2017. doi: 10.1109/JAS.2016.7510256
|
[7] |
W. Wang, X. Na, D. Cao, J. Gong, J. Xi, Y. Xing and F. Wang, “Decision-making in driver-automation shared control: A review and perspectives,” IEEE/CAA Journal of Automatica Sinica, vol. 7, no. 5, pp. 1289–1307, Sept. 2020.
|
[8] |
H. Kajimoto, N. Kawakami, T. Maeda, and S. Tachi, “Electro-tactile display with tactile primary color approach,” Graduate School of Information and Technology, The University of Tokyo, Japan, 2004.
|
[9] |
H. Tang and D. J. Beebe, “Design and microfabrication of a flexible oral electrotactile display,” Journal of Microelectromechanical Systems, vol. 12, no. 1, pp. 29–36, 2003. doi: 10.1109/JMEMS.2002.807478
|
[10] |
L. A. Jones and N. B. Sarter, “Tactile displays: Guidance for their design and application,” Human factors, vol. 50, no. 1, pp. 90–111, 2008. doi: 10.1518/001872008X250638
|
[11] |
A. B. Vallbo and R. S. Johansson, “Properties of cutaneous mechanoreceptors in the human hand related to touch sensation,” Human Neurobiol, vol. 3, no. 1, pp. 3–14, 1984.
|
[12] |
R. H. Gibson, “Electrical stimulation of pain and touch,” in Proc. 1st International Symposium on the Skin Senses, 1986, pp. 223–260.
|
[13] |
F. Xu and H. Wang, “Soft robotics: Morphology and morphology-inspired motion strategy,” IEEE/CAA Journal of Automatica Sinica, vol. 8, no. 9, pp. 1500–1522, Sept. 2021. doi: 10.1109/JAS.2021.1004105
|
[14] |
G. C. Bettelani, G. Averta, M. G. Catalano, B. Leporini, and M. Bianchi, “Design and validation of the readable device: A single-cell electromagnetic refreshable braille display,” IEEE Trans. Haptics, vol. 13, no. 1, pp. 239–245, 2020. doi: 10.1109/TOH.2020.2970929
|
[15] |
H. Hernandez, E. Preza, and R. Velazquez, “Characterization of a Piezoelectric Ultrasonic Linear Motor for Braille Displays,” in Proc. Electronics, Robotics and Auto. Mechanics Conf. (CERMA), 2009, pp. 402–407.
|
[16] |
F. Vidal-Verdu, M. J. Madueno, and R. Navas, “Thermopneumatic actuator for tactile displays and smart actuation circuitry,” in Proc. SPIE 5836, Smart Sensors, Actuators, and MEMS II, 2005, pp. 484–492.
|
[17] |
R. Veladzquez, E. E. Pissaloux, M. Hafez, and J. Szewczyk, “Tactile rendering with shape-memory-alloy pin-matrix,” IEEE Trans. Instrumentation and Measurement, vol. 57, no. 5, pp. 1051–1057, 2008. doi: 10.1109/TIM.2007.913768
|