A journal of IEEE and CAA , publishes high-quality papers in English on original theoretical/experimental research and development in all areas of automation
Volume 7 Issue 2
Mar.  2020

IEEE/CAA Journal of Automatica Sinica

  • JCR Impact Factor: 7.847, Top 10% (SCI Q1)
    CiteScore: 13.0, Top 5% (Q1)
    Google Scholar h5-index: 64, TOP 7
Turn off MathJax
Article Contents
Kai Zhong, Min Han and Bing Han, "Data-Driven Based Fault Prognosis for Industrial Systems: A Concise Overview," IEEE/CAA J. Autom. Sinica, vol. 7, no. 2, pp. 330-345, Mar. 2020. doi: 10.1109/JAS.2019.1911804
Citation: Kai Zhong, Min Han and Bing Han, "Data-Driven Based Fault Prognosis for Industrial Systems: A Concise Overview," IEEE/CAA J. Autom. Sinica, vol. 7, no. 2, pp. 330-345, Mar. 2020. doi: 10.1109/JAS.2019.1911804

Data-Driven Based Fault Prognosis for Industrial Systems: A Concise Overview

doi: 10.1109/JAS.2019.1911804
Funds:  This work was supported by the National Natural Science Foundation of China (61773087), in part by the National Key Research and Development Program of China (2018YFB1601500), and High-tech Ship Research Project of Ministry of Industry and Information Technology-Research of Intelligent Ship Testing and Verifacation ([2018]473)
More Information
  • Fault prognosis is mainly referred to the estimation of the operating time before a failure occurs, which is vital for ensuring the stability, safety and long lifetime of degrading industrial systems. According to the results of fault prognosis, the maintenance strategy for underlying industrial systems can realize the conversion from passive maintenance to active maintenance. With the increased complexity and the improved automation level of industrial systems, fault prognosis techniques have become more and more indispensable. Particularly, the data-driven based prognosis approaches, which tend to find the hidden fault factors and determine the specific fault occurrence time of the system by analysing historical or real-time measurement data, gain great attention from different industrial sectors. In this context, the major task of this paper is to present a systematic overview of data-driven fault prognosis for industrial systems. Firstly, the characteristics of different prognosis methods are revealed with the data-based ones being highlighted. Moreover, based on the different data characteristics that exist in industrial systems, the corresponding fault prognosis methodologies are illustrated, with emphasis on analyses and comparisons of different prognosis methods. Finally, we reveal the current research trends and look forward to the future challenges in this field. This review is expected to serve as a tutorial and source of references for fault prognosis researchers.

     

  • loading
  • [1]
    Y. Qiao, S. Zhang, N. Wu, M. Zhou, Z. Li, and T. Qu, “Efficient approach to failure response of process module in dual-arm cluster tools with wafer residency time constraints, ” IEEE Trans. Systems, Man, and Cybernetics: Systems, [Online]. Available: https://ieeexplore.ieee.org/document/8667426/
    [2]
    J. Xue and K. Yang, “Fault detection for non-gaussian processes using generalized canonical correlation analysis and randomized algorithms,” IEEE Trans. Reliability, vol. 44, no. 4, pp. 683–688, 1995. doi: 10.1109/24.476002
    [3]
    P. Lim, C. K. Goh, K. C. Tan, and P. Dutta, “Multimodal degradation prognostics based on switching kalman filter ensemble,” IEEE Trans. Neural Networks and Learning Systems, vol. 28, no. 1, pp. 136–148, 2017. doi: 10.1109/TNNLS.2015.2504389
    [4]
    X. Yin and Z. Li, “Decentralized fault prognosis of discrete-event systems using state-estimate-based protocols,” IEEE Trans. Cybernetics, no. 99, pp. 1–12, 2018.
    [5]
    E. Zio and G. Peloni, “Particle filtering prognostic estimation of the remaining useful life of nonlinear components,” Reliability Engineering &System Safety, vol. 96, no. 3, pp. 403–409, 2011.
    [6]
    Z. Ding, Y. Zhou, G. Pu, and M. Zhou, “Online failure prediction for railway transportation systems based on fuzzy rules and data analysis,” IEEE Trans. Reliability, vol. 67, no. 3, pp. 1143–1158, 2018. doi: 10.1109/TR.2018.2828113
    [7]
    J. Lee, J. Ni, D. Djurdjanovic, H. Qiu, and H. Liao, “Intelligent prognostics tools and e-maintenance,” Computers in Industry, vol. 57, no. 6, pp. 476–489, 2006. doi: 10.1016/j.compind.2006.02.014
    [8]
    T. L. Nguyen, M. Djeziri, B. Ananou, M. Ouladsine, and J. Pinaton, “Fault prognosis for batch production based on percentile measure and gamma process: application to semiconductor manufacturing,” J. Process Control, vol. 48, pp. 70–80, 2016.
    [9]
    S. Yin, S. X. Ding, X. Xie, and H. Luo, “A review on basic data-driven approaches for industrial process monitoring,” IEEE Trans. Industrial Electronics, vol. 61, no. 11, pp. 6418–6428, 2014. doi: 10.1109/TIE.2014.2301773
    [10]
    X. Wang, B. Jiang, N. Lu, and C. Zhang, “Dynamic fault prognosis for multivariate degradation process,” Neurocomputing, vol. 275, pp. 1112–1120, 2018. doi: 10.1016/j.neucom.2017.09.058
    [11]
    Y. Motai, “Kernel association for classification and prediction: a survey,” IEEE Trans. Neural Networks and Learning Systems, vol. 26, no. 2, pp. 208–223, 2015. doi: 10.1109/TNNLS.2014.2333664
    [12]
    V. Climente-Alarcon, J. Alfonso Antonino-Daviu, E. G. Strangas, and M. Riera-Guasp, “Rotor-bar breakage mechanism and prognosis in an induction motor,” IEEE Trans. Industrial Electronics, vol. 62, no. 3, pp. 1814–1825, 2015. doi: 10.1109/TIE.2014.2336604
    [13]
    J. Fan and Y. Tang, “An emd-svr method for non-stationary time series prediction,” in Proc. 2013 Int. Conf. Quality, Reliability, Risk, Maintenance, and Safety Engineering (QR2MSE), pp. 1765–1770.
    [14]
    X. Chen, Z. Shen, Z. He, C. Sun, and Z. Liu, “Remaining life prognostics of rolling bearing based on relative features and multivariable support vector machine,” in Proc. Institution of Mechanical Engineers,Part C:J. Mechanical Engineering Science, vol. 227, no. 12, pp. 2849–2860, 2013. doi: 10.1177/0954406212474395
    [15]
    M. Shang, X. Luo, Z. Liu, J. Chen, Y. Yuan, and M. Zhou, “Randomized latent factor model for high-dimensional and sparse matrices from industrial applications,” IEEE/CAA J. Autom. Sinica, vol. 6, no. 1, pp. 131–141, 2019. doi: 10.1109/JAS.2018.7511189
    [16]
    H. Chen and B. Jiang, “A review of fault detection and diagnosis for the traction system in high-speed trains,” IEEE Trans. Intelligent Transportation Systems, 2019.
    [17]
    Z. Chen, S. X. Ding, T. Peng, C. Yang, and W. Gui, “Fault detection for non-Gaussian processes using generalized canonical correlation analysis and randomized algorithms,” IEEE Trans. Industrial Electronics, vol. 65, no. 2, pp. 1559–1567, 2018. doi: 10.1109/TIE.2017.2733501
    [18]
    K. Zhong, M. Han, T. Qiu, and B. Han, “Fault diagnosis of complex processes using sparse kernel local fisher discriminant analysis,” IEEE Trans. Neural Networks and Learning Systems, 2019. doi: 10.1109/TNNLS.2019.2920903,2019
    [19]
    H. Liu, M. Zhou, and Q. G. Liu, “An embedded feature selection method for imbalanced data classification,” IEEE/CAA J. Autom. Sinica, vol. 6, no. 3, pp. 703–715, 2019.
    [20]
    C. Zhao and F. Gao, “Critical-to-fault-degradation variable analysis and direction extraction for online fault prognostic,” IEEE Trans. Control Systems Technology, vol. 25, no. 3, pp. 842–854, 2017. doi: 10.1109/TCST.2016.2576018
    [21]
    J. Tian, C. Morillo, M. H. Azarian, and M. Pecht, “Motor bearing fault detection using spectral kurtosis-based feature extraction coupled with k-nearest neighbor distance analysis,” IEEE Trans. Industrial Electronics, vol. 63, no. 3, pp. 1793–1803, 2016. doi: 10.1109/TIE.2015.2509913
    [22]
    W. Feng, T. Xu, T. Tao, M. C. Zhou, and H. Wang, “Bilevel feature extraction-based text mining for fault diagnosis of railway systems,” IEEE Trans. Intelligent Transportation Systems, vol. 18, no. 1, pp. 49–58, 2016.
    [23]
    Z. Liu, Z. Han, Y. Zhang, and Q. Zhang, “Multiwavelet packet entropy and its application in transmission line fault recognition and classification,” IEEE Trans. Neural Networks and Learning Systems, vol. 25, no. 11, pp. 2043–2052, 2014. doi: 10.1109/TNNLS.2014.2303086
    [24]
    R. Shao, W. Hu, Y. Wang, and X. Qi, “The fault feature extraction and classification of gear using principal component analysis and kernel principal component analysis based on the wavelet packet transform,” Measurement, vol. 54, no. 6, pp. 118–132, 2014.
    [25]
    Q. Jiang, X. Yan, and B. Huang, “Performance-driven distributed PCA process monitoring based on fault-relevant variable selection and Bayesian inference,” IEEE Trans. Industrial Electronics, vol. 63, no. 1, pp. 377–386, 2016. doi: 10.1109/TIE.2015.2466557
    [26]
    Y. Zhang, N. Yang, and S. Li, “Fault isolation of nonlinear processes based on fault directions and features,” IEEE Trans. Control Systems Technology, vol. 22, no. 4, pp. 1567–1572, 2014. doi: 10.1109/TCST.2013.2283925
    [27]
    S. Yin, X. Zhu, and O. Kaynak, “Improved PLS focused on keyperformance-indicator-related fault diagnosis,” IEEE Trans. Industrial Electronics, vol. 62, no. 3, pp. 1651–1658, 2015. doi: 10.1109/TIE.2014.2345331
    [28]
    X. Jin, M. Zhao, T. W. S. Chow, and M. Pecht, “Motor bearing fault diagnosis using trace ratio linear discriminant analysis,” IEEE Trans. Industrial Electronics, vol. 61, no. 5, pp. 2441–2451, 2013.
    [29]
    C. Zhao and F. Gao, “Fault subspace selection approach combined with analysis of relative changes for reconstruction modeling and multifault diagnosis,” IEEE Trans. Control Systems Technology, vol. 24, no. 3, pp. 928–939, 2016. doi: 10.1109/TCST.2015.2464331
    [30]
    M. Riera-Guasp, M. Pineda-Sanchez, J. Pérez-Cruz, R. Puche-Panadero, J. Roger-Folch, and J. A. Antonino-Daviu, “Diagnosis of induction motor faults via gabor analysis of the current in transient regime,” IEEE Trans. Instrumentation and Measurement, vol. 61, no. 6, pp. 1583–1596, 2012. doi: 10.1109/TIM.2012.2186650
    [31]
    R. Yan, R. X. Gao, and X. Chen, “Wavelets for fault diagnosis of rotary machines: a review with applications,” Signal Processing, vol. 96, no. 5, pp. 1–15, 2014.
    [32]
    Z. Lou, D. Shen, and Y. Wang, “Two-step principal component analysis for dynamic processes monitoring,” The Canadian J. Chemical Engineering, vol. 96, no. 1, pp. 160–170, 2018. doi: 10.1002/cjce.22855
    [33]
    T.-B.-L. Nguyen, M. A. Djeziri, B. Ananou, M. Ouladsine, and J. Pinaton, “Health index extraction methods for batch processes in semiconductor manufacturing,” IEEE Trans. Semiconductor Manufacturing, vol. 28, no. 3, pp. 306–317, 2015. doi: 10.1109/TSM.2015.2438642
    [34]
    Y. Zhang, H. Zhou, S. J. Qin, and T. Chai, “Decentralized fault diagnosis of large-scale processes using multiblock kernel partial least squares,” IEEE Trans. Industrial Informatics, vol. 6, no. 1, pp. 3–10, 2010. doi: 10.1109/TII.2009.2033181
    [35]
    Z. K. Peng and F. L. Chu, “Application of the wavelet transform in machine condition monitoring and fault diagnostics: a review with bibliography,” Mechanical Systems and Signal Processing, vol. 18, no. 2, pp. 199–221, 2004. doi: 10.1016/S0888-3270(03)00075-X
    [36]
    B. Zhang, C. Sconyers, C. Byington, R. Patrick, M. E. Orchard, and G. Vachtsevanos, “A probabilistic fault detection approach: application to bearing fault detection,” IEEE Trans. Industrial Electronics, vol. 58, no. 8, pp. 2011–2018, 2011.
    [37]
    W. A. Smith and R. B. Randall, “Rolling element bearing diagnostics using the case western reserve university data: a benchmark study,” Mechanical Systems and Signal Processing, vol. 64–65, pp. 100–131, 2015. doi: 10.1016/j.ymssp.2015.04.021
    [38]
    H. Chen, B. Jiang, W. Chen, and H. Yi, “Data-driven detection and diagnosis of incipient faults in electrical drives of high-speed trains,” IEEE Trans. Industrial Electronics, vol. 66, no. 6, pp. 4716–4725, 2018.
    [39]
    Z. Jiang, Z. Li, N. Wu, and M. Zhou, “A Petri net approach to fault diagnosis and restoration for power transmission systems to avoid the output interruption of substations,” IEEE Systems J., vol. 12, no. 3, pp. 2566–2576, Sept. 2018.
    [40]
    H. Chen, B. Jiang, S. X. Ding, N. Lu, and W. Chen, “Probabilityrelevant incipient fault detection and diagnosis methodology with applications to electric drive systems,” IEEE Trans. Control Systems Technology, 2018.
    [41]
    M. Yuan, Y. Wu, and L. Lin, “Fault diagnosis and remaining useful life estimation of aero engine using lstm neural network,” in Proc. 2016 IEEE Int. Conf. Aircraft Utility Systems, pp. 135– 140.
    [42]
    Y. Wu, M. Yuan, S. Dong, L. Lin, and Y. Liu, “Remaining useful life estimation of engineered systems using vanilla lstm neural networks,” Neurocomputing, vol. 275, pp. 167–179, 2018. doi: 10.1016/j.neucom.2017.05.063
    [43]
    C. Tong and X. Shi, “Decentralized monitoring of dynamic processes based on dynamic feature selection and informative fault pattern dissimilarity,” IEEE Trans. Industrial Electronics, vol. 63, no. 6, pp. 3804–3814, 2016. doi: 10.1109/TIE.2016.2530047
    [44]
    P. Baruah and R. B. Chinnam, “HMMs for diagnostics and prognostics in machining processes,” Int. J. Production Research, vol. 43, no. 6, pp. 1275–1293, 2005. doi: 10.1080/00207540412331327727
    [45]
    A. Soualhi, G. Clerc, H. Razik, M. El badaoui, and F. Guillet, “Hidden Markov models for the prediction of impending faults,” IEEE Trans. Industrial Electronics, vol. 63, no. 5, pp. 3271–3281, 2016. doi: 10.1109/TIE.2016.2535111
    [46]
    T. Liu, K. Zhu, and L. Zeng, “Diagnosis and prognosis of degradation process via hidden semi-Markov model,” IEEE/ASME Trans. Mechatronics, vol. 23, no. 3, pp. 1456–1466, 2018. doi: 10.1109/TMECH.2018.2823320
    [47]
    J. Liu, W. Wang, F. Ma, Y. Yang, and C. Yang, “A data-modelfusion prognostic framework for dynamic system state forecasting,” Engineering Applications of Artificial Intelligence, vol. 25, no. 4, pp. 814–823, 2012. doi: 10.1016/j.engappai.2012.02.015
    [48]
    Z. Xu, Y. Ji, and D. Zhou, “A new real-time reliability prediction method for dynamic systems based on on-line fault prediction,” IEEE Trans. Reliability, vol. 58, no. 3, pp. 523–538, 2009. doi: 10.1109/TR.2009.2026785
    [49]
    L. B. Cosme, W. M. Caminhas, M. F. S. V. DAngelo, and R. M. Palhares, “A novel fault-prognostic approach based on interacting multiple model filters and fuzzy systems,” IEEE Trans. Industrial Electronics, vol. 66, no. 1, pp. 519–528, 2019. doi: 10.1109/TIE.2018.2826449
    [50]
    G. Li, S. J. Qin, Y. Ji, and D. Zhou, “Reconstruction based fault prognosis for continuous processes,” Control Engineering Practice, vol. 18, no. 10, pp. 1211–1219, 2010. doi: 10.1016/j.conengprac.2010.05.012
    [51]
    C. Zhao and F. Gao, “Online fault prognosis with relative deviation analysis and vector autoregressive modeling,” Chemical Engineering Science, vol. 138, pp. 531–543, 2015. doi: 10.1016/j.ces.2015.08.037
    [52]
    Y. Wang, F. Sun, and B. Li, “Multiscale neighborhood normalizationbased multiple dynamic pca monitoring method for batch processes with frequent operations,” IEEE Trans. Automation Science and Engineering, vol. 15, no. 3, pp. 1053–1064, 2018. doi: 10.1109/TASE.2017.2713800
    [53]
    Q. Jia and Y. Zhang, “Quality-related fault detection approach based on dynamic kernel partial least squares,” Chemical Engineering Research and Design, vol. 106, pp. 242–252, 2016. doi: 10.1016/j.cherd.2015.12.015
    [54]
    B. De Ketelaere, M. Hubert, and E. Schmitt, “Overview of pcabased statistical process-monitoring methods for time-dependent, highdimensional data,” J. Quality Technology, vol. 47, no. 4, pp. 318–335, 2015. doi: 10.1080/00224065.2015.11918137
    [55]
    A. Heng, S. Zhang, A. C. Tan, and J. Mathew, “Rotating machinery prognostics: state of the art, challenges and opportunities,” Mechanical Systems and Signal Processing, vol. 23, no. 3, pp. 724–739, 2009. doi: 10.1016/j.ymssp.2008.06.009
    [56]
    M. Han, K. Zhong, T. Qiu, and B. Han, “Interval type-2 fuzzy neural networks for chaotic time series prediction: a concise overview,” IEEE Trans. Cybernetics, 2018.
    [57]
    A. T. Jahromi, M. J. Er, X. Li, and B. S. Lim, “Sequential fuzzy clustering based dynamic fuzzy neural network for fault diagnosis and prognosis,” Neurocomputing, vol. 196, pp. 31–41, 2016. doi: 10.1016/j.neucom.2016.02.036
    [58]
    P. Wang and G. Vachtsevanos, “Fault prognostics using dynamic wavelet neural networks,” AI EDAM, vol. 15, no. 4, pp. 349–365, 2001.
    [59]
    S. Kiakojoori and K. Khorasani, “Dynamie neural networks for jet engine degradation prediction and prognosis,” in Proc. IEEE Int. Joint Conf. Neural Networks, pp. 2531–2538, 2014.
    [60]
    H. K. Khalil and J. W. Grizzle, Nonlinear Systems, Prentice Hall Upper Saddle River, NJ, 2002.
    [61]
    Y. Xu, Y. Liu, and Q. Zhu, “Multivariate time delay analysis based local kpca fault prognosis approach for nonlinear processes,” Chinese J. Chemical Engineering, vol. 24, no. 10, pp. 1413–1422, 2016. doi: 10.1016/j.cjche.2016.06.011
    [62]
    D. T. Liu, Y. Peng, and X. Y. Peng, “Fault prediction based on time series with online combined kernel SVR methods,” in Proc. IEEE Conf. Instrumentation and Measurement Technology, 2009. I2MTC, pp. 1163–1166.
    [63]
    C. Zhao, F. Gao, and F. Wang, “Nonlinear batch process monitoring using phase-based kernel-independent component analysis- principal component analysis (KICA-PCA),” Industrial &Engineering Chemistry Research, vol. 48, no. 20, pp. 9163–9174, 2009.
    [64]
    G. R. Halligan and S. Jagannathan, “PCA-based fault isolation and prognosis with application to pump,” The Int. J. Advanced Manufacturing Technology, vol. 55, no. 5–8, pp. 699–707, 2011. doi: 10.1007/s00170-010-3096-2
    [65]
    N. J. Gordon, D. J. Salmond, and A. F. Smith, “Novel approach to nonlinear/non-Gaussian Bayesian state estimation,” in Proc. IEE F Radar and Signal Processing, vol. 140, no. 2, pp. 107–113, 1993.
    [66]
    M. E. Orchard, A Particle Filtering-Based Framework for On-Line Fault Diagnosis and Failure Prognosis. Ph.D. dissertation, Georgia Institute of Technology, 2007.
    [67]
    M. E. Orchard, P. Hevia-Koch, B. Zhang, and L. Tang, “Risk measures for particle-filtering-based state-of-charge prognosis in lithium-ion batteries,” IEEE Trans. Industrial Electronics, vol. 60, no. 11, pp. 5260–5269, 2013. doi: 10.1109/TIE.2012.2224079
    [68]
    X. Jin, Y. Sun, Z. Que, Y. Wang, and T. W. Chow, “Anomaly detection and fault prognosis for bearings,” IEEE Trans. Instrumentation and Measurement, vol. 65, no. 9, pp. 2046–2054, 2016. doi: 10.1109/TIM.2016.2570398
    [69]
    X. Z. Chen, J. S. Yu, D. Y. Tang, and Y. X. Wang, “A novel PF-lssvrbased framework for failure prognosis of nonlinear systems with timevarying parameters,” Chinese J. Aeronautics, vol. 25, no. 5, pp. 715–724, 2012. doi: 10.1016/S1000-9361(11)60438-X
    [70]
    N. Daroogheh, A. Baniamerian, N. Meskin, and K. Khorasani, “Prognosis and health monitoring of nonlinear systems using a hybrid scheme through integration of PFS and neural networks,” IEEE Trans. Systems,Man,and Cybernetics:Systems, vol. 47, no. 8, pp. 1990–2004, 2017. doi: 10.1109/TSMC.2016.2597272
    [71]
    J. Sikorska, M. Hodkiewicz, and L. Ma, “Prognostic modelling options for remaining useful life estimation by industry,” Mechanical Systems and Signal Processing, vol. 25, no. 5, pp. 1803–1836, 2011. doi: 10.1016/j.ymssp.2010.11.018
    [72]
    D. Mandic and J. Chambers, Recurrent Neural Networks for Prediction: Architectures, Learning Algorithms and Stability, 2001.
    [73]
    J. Ma, Q. Wang, G. Li, and D. Zhou, “Reconstruction-based fault prognosis for flue gas turbines with independent component analysis,” Asia-Pacific J. Chemical Engineering, vol. 9, no. 2, pp. 205–213, 2014. doi: 10.1002/apj.1760
    [74]
    J. Ma, G. Li, and D. Zhou, “Fault prognosis technology for non-Gaussian and nonlinear processes based on KICA reconstruction,” The Canadian J. Chemical Engineering, vol. 96, no. 2, pp. 515–520, 2018. doi: 10.1002/cjce.23051
    [75]
    Z. Ge, Z. Song, and P. Wang, “Probabilistic combination of local independent component regression model for multimode quality prediction in chemical processes,” Chemical Engineering Research and Design, vol. 92, no. 3, pp. 509–521, 2014. doi: 10.1016/j.cherd.2013.09.010
    [76]
    Z. Wang, J. -L. Zarader, and S. Argentieri, “A novel aircraft fault diagnosis and prognosis system based on Gaussian mixture models,” in Proc. 12th IEEE Int. Conf. Control Automation Robotics & Vision, pp. 1794–1799, 2012.
    [77]
    A. Rai and S. Upadhyay, “An integrated approach to bearing prognostics based on eemd-multi feature extraction, Gaussian mixture models and jensen-rényi divergence,” Applied Soft Computing, vol. 71, pp. 36–50, 2018. doi: 10.1016/j.asoc.2018.06.038
    [78]
    Y. Wen, J. Wu, and Y. Yuan, “Multiple-phase modeling of degradation signal for condition monitoring and remaining useful life prediction,” IEEE Trans. Reliability, vol. 66, no. 3, pp. 924–938, 2017. doi: 10.1109/TR.2017.2710319
    [79]
    K. Verbert, B. De Schutter, and R. Babuška, “A multiple-model reliability prediction approach for condition-based maintenance,” IEEE Trans. Reliability, vol. 67, no. 3, 2018.
    [80]
    C. K. R. Lim and D. Mba, “Switching Kalman filter for failure prognostic,” Mechanical Systems and Signal Processing, vol. 52, pp. 426–435, 2015.
    [81]
    Y. Lei, N. Li, L. Guo, N. Li, T. Yan, and J. Lin, “Machinery health prognostics: a systematic review from data acquisition to rul prediction,” Mechanical Systems and Signal Processing, vol. 104, pp. 799–834, 2018. doi: 10.1016/j.ymssp.2017.11.016
    [82]
    B. S. Dayal and J. F. MacGregor, “Recursive exponentially weighted pls and its applications to adaptive control and prediction,” J. Process Control, vol. 7, no. 3, pp. 169–179, 1997. doi: 10.1016/S0959-1524(97)80001-7
    [83]
    O. Prakash, A. K. Samantaray, R. Bhattacharyya, and S. K. Ghoshal, “Adaptive prognosis for a multi-component dynamical system of unknown degradation modes,” IFAC-Papers OnLine, vol. 51, no. 24, pp. 184–191, 2018. doi: 10.1016/j.ifacol.2018.09.576
    [84]
    Y. Wen, J. Wu, D. Das, and T.-L. B. Tseng, “Degradation modeling and rul prediction using wiener process subject to multiple change points and unit heterogeneity,” Reliability Engineering &System Safety, vol. 176, pp. 113–124, 2018.
    [85]
    M. Yu, D. Wang, and M. Luo, “An integrated approach to prognosis of hybrid systems with unknown mode changes,” IEEE Trans. Industrial Electronics, vol. 62, no. 1, pp. 503–515, 2015. doi: 10.1109/TIE.2014.2327557
    [86]
    M. Yu, D. Wang, and M. Luo, “Model-based prognosis for hybrid systems with mode-dependent degradation behaviors,” IEEE Trans. Industrial Electronics, vol. 61, no. 1, pp. 546–554, 2014. doi: 10.1109/TIE.2013.2244538
    [87]
    A. Ragab, S. Yacout, M.-S. Ouali, and H. Osman, “Prognostics of multiple failure modes in rotating machinery using a pattern-based classifier and cumulative incidence functions,” J. Intelligent Manufacturing, pp. 1–20, 2016.
    [88]
    E. Dyer, M. Majzoobi, and F. Koushanfar, “Hybrid modeling of nonstationary process variations,” in Proc. 48th ACM Design Automation Conf., pp. 194–199, 2011.
    [89]
    J. Liu, D. Djurdjanovic, J. Ni, N. Casoetto, and J. Lee, “Similarity based method for manufacturing process performance prediction and diagnosis,” Computers in Industry, vol. 58, no. 6, pp. 558–566, 2007. doi: 10.1016/j.compind.2006.12.004
    [90]
    J. Lee, F. Wu, W. Zhao, M. Ghaffari, L. Liao, and D. Siegel, “Prognostics and health management design for rotary machinery systemsłreviews, methodology and applications,” Mechanical Systems and Signal Processing, vol. 42, no. 1–2, pp. 314–334, 2014.
    [91]
    M. S. Kan, A. C. Tan, and J. Mathew, “A review on prognostic techniques for non-stationary and non-linear rotating systems,” Mechanical Systems and Signal Processing, vol. 62, pp. 1–20, 2015.
    [92]
    M. Dong and D. He, “Hidden semi-markov model-based methodology for multi-sensor equipment health diagnosis and prognosis,” European J. Operational Research, vol. 178, no. 3, pp. 858–878, 2007. doi: 10.1016/j.ejor.2006.01.041
    [93]
    Y. Peng and M. Dong, “A hybrid approach of hmm and grey model for age-dependent health prediction of engineering assets,” Expert Systems with Applications, vol. 38, no. 10, pp. 12946–12953, 2011. doi: 10.1016/j.eswa.2011.04.091
    [94]
    Q. Liu, M. Dong, and Y. Peng, “A novel method for online health prognosis of equipment based on hidden semi-Markov model using sequential monte carlo methods,” Mechanical Systems and Signal Processing, vol. 32, pp. 331–348, 2012. doi: 10.1016/j.ymssp.2012.05.004
    [95]
    L. Wang, Support Vector Machines: Theory and Applications, vol. 177. Springer Science & Business Media, 2005.
    [96]
    H. -Z. Huang, H. -K. Wang, Y. -F. Li, L. Zhang, and Z. Liu, “Support vector machine based estimation of remaining useful life: current research status and future trends,” J. Mechanical Science and Technology, vol. 29, no. 1, pp. 151–163, 2015. doi: 10.1007/s12206-014-1222-z
    [97]
    M. S. Arulampalam, S. Maskell, N. Gordon, and T. Clapp, “A tutorial on particle filters for online nonlinear/non-Gaussian Bayesian tracking,” IEEE Trans. Signal Processing, vol. 50, no. 2, pp. 174–188, 2002. doi: 10.1109/78.978374
    [98]
    D. An, J. -H. Choi, and N. H. Kim, “Prognostics 101: a tutorial for particle filter-based prognostics algorithm using MATLAB,” Reliability Engineering &System Safety, vol. 115, pp. 161–169, 2013.
    [99]
    A. Doucet, N. De Freitas, K. Murphy, and S. Russell, “Raoblackwellised particle filtering for dynamic Bayesian networks,” in Proc. 16th Conf. Uncertainty in Artificial Intelligence, pp. 176–183, Morgan Kaufmann Publishers Inc., 2000.
    [100]
    K. Ažman and J. Kocijan, “Dynamical systems identification using Gaussian process models with incorporated local models,” Engineering Applications of Artificial Intelligence, vol. 24, no. 2, pp. 398–408, 2011. doi: 10.1016/j.engappai.2010.10.010
    [101]
    S. Saha, B. Saha, A. Saxena, and K. Goebel, “Distributed prognostic health management with Gaussian process regression,” in Proc. 2010 IEEE Aerospace Conf., pp. 1–8.
    [102]
    S. Hong and Z. Zhou, “Remaining useful life prognosis of bearing based on Gauss process regression,” in Proc. 5th IEEE Int. Conf. BioMedical Engineering and Informatics, pp. 1575–1579, 2012.
    [103]
    S. Hong and Z. Zhou, “Application of Gaussian process regression for bearing degradation assessment,” in Proc. 6th IEEE Int. Conf. New Trends in Information Science, Service Science and Data Mining, pp. 644–648, 2012.
    [104]
    L. Liao, W. Jin, and R. Pavel, “Enhanced restricted Boltzmann machine with prognosability regularization for prognostics and health assessment,” IEEE Trans. Industrial Electronics, vol. 63, no. 11, pp. 7076–7083, 2016. doi: 10.1109/TIE.2016.2586442
    [105]
    F. A. P. Peres and F. S. Fogliatto, “Variable selection methods in multivariate statistical process control: a systematic literature review,” Computers &Industrial Engineering, vol. 115, pp. 603–619, 2018.
    [106]
    A. Glowacz, W. Glowacz, Z. Glowacz, and J. Kozik, “Early fault diagnosis of bearing and stator faults of the single-phase induction motor using acoustic signals,” Measurement, vol. 113, pp. 1–9, 2018.
    [107]
    G. Bin, J. Gao, X. Li, and B. Dhillon, “Early fault diagnosis of rotating machinery based on wavelet packetsłempirical mode decomposition feature extraction and neural network,” Mechanical Systems and Signal Processing, vol. 27, pp. 696–711, 2012. doi: 10.1016/j.ymssp.2011.08.002
    [108]
    L. Liao and F. Köttig, “Review of hybrid prognostics approaches for remaining useful life prediction of engineered systems, and an application to battery life prediction,” IEEE Trans. Reliability, vol. 63, no. 1, pp. 191–207, 2014. doi: 10.1109/TR.2014.2299152
    [109]
    Z. Liu, Q. Li, and C. Mu, “A hybrid LSSVR-HMM based prognostics approach,” in Proc. 4th IEEE Int. Conf. Intelligent Human-Machine Systems and Cybernetics, vol. 2, pp. 275–278, 2012.
    [110]
    L. Peel, “Data driven prognostics using a kalman filter ensemble of neural network models,” in Proc. IEEE Int. Conf. Prognostics and Health Management, pp. 1–6, 2008.
    [111]
    F. O. Heimes, “Recurrent neural networks for remaining useful life estimation, ” in Proc. IEEE Int. Conf. Prognostics and Health Management, pp. 1–6, 2008.
    [112]
    H. Viot, A. Sempey, L. Mora, J. Batsale, and J. Malvestio, “Model predictive control of a thermally activated building system to improve energy management of an experimental building: Part I-modeling and measurements,” Energy and Buildings, vol. 172, pp. 94–103, 2018. doi: 10.1016/j.enbuild.2018.04.055
    [113]
    J. Glassey and M. von Stosch, “Benefits and challenges of hybrid modeling in the process industries: an introduction, ” Hybrid Modeling in Process Industries, pp. 1–12, CRC Press, 2018.
    [114]
    T. -C. Lu and C. -C. Chang, “Color image retrieval technique based on color features and image bitmap,” Information Processing &Management, vol. 43, no. 2, pp. 461–472, 2007.
    [115]
    H. Ahuett-Garza and T. Kurfess, “A brief discussion on the trends of habilitating technologies for industry 4.0 and smart manufacturing,” Manufacturing Letters, vol. 15, pp. S2213846318300270, 2018.
    [116]
    T. J. Rato and M. S. Reis, “Multiresolution soft sensors: a new class of modelstructures for handling multiresolution data,” Industrial and Engineering Chemistry Research, vol. 56, no. 13, pp. 3640–3654, 2017. doi: 10.1021/acs.iecr.6b04349
    [117]
    H. Kaneko and K. Funatsu, “A soft sensor method based on values predicted from multiple intervals of time difference for improvement and estimation of prediction accuracy,” Chemometrics and Intelligent Laboratory Systems, vol. 109, no. 2, pp. 197–206, 2011. doi: 10.1016/j.chemolab.2011.09.003
    [118]
    B. Lin and S. B. Jrgensen, “Soft sensor design by multivariate fusion of image features and process measurements,” J. Process Control, vol. 21, no. 4, pp. 547–553, 2011. doi: 10.1016/j.jprocont.2011.01.006
    [119]
    Z. Ge, “Review on data-driven modeling and monitoring for plantwide industrial processes,” Chemometrics and Intelligent Laboratory Systems, 2017.
    [120]
    L. Wang, J. Tao, R. Ranjan, H. Marten, A. Streit, J. Chen, and D. Chen, “G-Hadoop: MapReduce across distributed data centers for data-intensive computing,” Future Generation Computer Systems, vol. 29, no. 3, pp. 739–750, 2013. doi: 10.1016/j.future.2012.09.001
    [121]
    J. Zhu, Z. Ge, and Z. Song, “Distributed parallel PCA for modeling and monitoring of large-scale plant-wide processes with big data,” IEEE Trans. Industrial Informatics, vol. 13, no. 4, pp. 1877–1885, 2017. doi: 10.1109/TII.2017.2658732

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Figures(7)  / Tables(6)

    Article Metrics

    Article views (1804) PDF downloads(216) Cited by()

    Highlights

    • Firstly, the characteristics of different prognosis methods are revealed with the data-based ones being highlighted.
    • Moreover, based on the different data characteristics that exist in industrial systems, the corresponding fault prognosis methodologies are illustrated, with emphasis on analyses and comparisons of different prognosis methods.
    • Finally, we reveal the current research trends and look forward to the future challenges in this field. This review is expected to serve as a tutorial and source of references for fault prognosis researchers.

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return